ALKA S.r.l.
Sede legale: Via Teodoro Frizzoni 19 - 24121 Bergamo - Ufficio: Via Molino Baertsch, 4 - 24124 Bergamo
Tel. +39 035 664881, Cell. +39 335 355569 - E-mail: info@alka-srl.com , PEC postmaster@pec.alka-srl.com
Reg. Imprese di Bergamo, EORI, C.F e P.IVA IT02515810162 - Codice destinatario T04ZHR3
N° meccanografico BG050196, REA: BG 300962, Cap. Soc. €10.400,00 int. vers.
A simple and intuitive method
ALKA Pro-Clean is a tube cleaning solution which operates by shooting a special projectile with a jet of compressed air. This system can be applied to tubes measuring an internal diameter from 1mm up to a few hundreds, and lengths of 10, 100 or even 1000m (depending on the air capacity) and can also be applied in the presence of 90° curves, “T” or "Y" couplings or ball valves.
1. Nozzle choice
2. Projectile choice
3. Shooting
After connecting the pistol to a source of compressed air, open the front ring and select the nozzle according to the diameter of the pipe to be cleaned. Insert the nozzle into the slot.
Select the appropriate projectile according to the diameter of the tube and the type of cleaning you need to perform. Insert the projectile inside the nozzle and close the front ring.
Push the nozzle towards the end of the tube. Pull the trigger and hold it until the projectile comes off at the other end, where the projectile and removed impurities can be collected into a container.
An example of a cleaning performed on a steel tube in order to remove metal processing residues.
Projectile after shooting
Before
After