ALKA S.r.l.
Registered office: Via Teodoro Frizzoni 19 - 24121 Bergamo - Office: Via Molino Baertsch, 4 - 24124 Bergamo
Tel. +39 035 664881, Cell. +39 335 355569 - E-mail: info@alka-srl.com , PEC postmaster@pec.alka-srl.com
Bergamo Business Register, EORI, Tax Code and VAT No. IT02515810162 - Recipient code T04ZHR3
BG050196 mechanographic number, REA: BG 300962, Share capital €10,400.00 fully paid up.
To view the videos, please accept cookies by clicking the "Accept" button in the banner below.
1- Cleaning stainless steel pipes
A demonstration of how easily stainless steel pipes (in this case, pipes for liquid oxygen) can be cleaned and degreased with the ALKA Pro-Clean pipe cleaning system, by shooting special projectiles using a specific gun powered by compressed air.
2- Cleaning Nitinol tube diameter 1mm
A demonstration of how it is possible to clean tubes with a diameter even smaller than 1mm. In this case, the cleaning was carried out on a tube with an external diameter of 1.2mm/internal 0.8mm in Nitinol. A delicate product, with superelastic and shape memory properties, which finds particularly sophisticated and specific applications in the medical, aerospace, and robotics sectors.
It should be emphasized that cleaning parts with such a small size is not straightforward; this aspect limits the choice of applicable mechanical methods and also the effectiveness of other solutions that rely on the cleaning power of fluids. The projectile allows for effective cleaning and a quick visual assessment of the result.
3- Cleaning of a (new) insulated copper pipe for air conditioning
A demonstration of how much soot and how many dangerous copper particles can be found in copper pipes, new and sealed.
These metallic particles, free to circulate in the system if not previously removed through cleaning, can cause serious damage to machines and components.
4- Cleaning of a (new) copper coil 2 km long
A demonstration of how it is possible to check for the presence of soot in a coil of tubing up to 2 km long. Soot is created when the tube has not been properly degreased before annealing in the furnace.
Time required to perform the operation: 4 minutes.
Also ideal for quality control.